| 翻訳と辞書 |
| Joggle bending ： ウィキペディア英語版 |
Bending (metalworking)
Bending is a manufacturing process that produces a V-shape, U-shape, or channel shape along a straight axis in ductile materials, most commonly sheet metal.〔Manufacturing Processes Reference Guide, Industrial Press Inc., 1994.〕 Commonly used equipment include box and pan brakes, brake presses, and other specialized machine presses. Typical products that are made like this are boxes such as electrical enclosures and rectangular ductwork.
== Process ==
In press brake forming, a work piece is positioned over the die block and the die block presses the sheet to form a shape.〔 Usually bending has to overcome both tensile stresses and compressive stresses. When bending is done, the residual stresses cause the material to ' towards its original position, so the sheet must be over-bent to achieve the proper bend angle. The amount of spring back is dependent on the material, and the type of forming. When sheet metal is bent, it stretches in length. The ''bend deduction'' is the amount the sheet metal will stretch when bent as measured from the outside edges of the bend. The ''bend radius'' refers to the inside radius. The formed bend radius is dependent upon the dies used, the material properties, and the material thickness.
The U-punch forms a U-shape with a single punch.〔
抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』
■ウィキペディアで「Bending (metalworking)」の詳細全文を読む
スポンサード リンク
| 翻訳と辞書 : 翻訳のためのインターネットリソース |
Copyright(C) kotoba.ne.jp 1997-2016. All Rights Reserved.
|
|